All lithium batteries must be charged in a LiPo safe charging container such as a “LiPo Bag” or a “Bat Safe” charging case.
17.5 RT-C
Chassis: 1/10 scale pan car chassis
Motor: Tekin spec motor #2762
Battery: 1-cell battery 4.20 max voltage
ESC Mode: blinky
Tires: WGT-R rubber (CRC-2314)
Body: Proto-form RT-C body (1239-25) in race style paint scheme
Ride Height: 4mm
Weight:1105 grams
Street Stock
Chassis: 1/10 buggy chassis
Rear Arms: stock non-adjustable
Motor: 17.5 Hobbywing Just Stock
ESC: Hobbywing Just Stock
Mode: blinky
Battery: 2 cell
HV batteries acceptable
Body: Street stock style
no buggy bodies
1 inch rear spoiler
no side dams
Tires: Bandito buggy 2.2
Short Course Mod
Body: UMP style modified body
Motor: 13.5
Battery: 2 cell
HV batteries acceptable
battery must be inline
Rear Arms: adjustable acceptable
Tires: Bandito short course 2.2 / 3.0
Short Course Late Model
Chassis: any stock 2wd short course
HCG or LCG
rear motor
Battery: 2 cell
HV batteries acceptable
battery must be inline
Rear Arms: adjustable acceptable
Body: late model any make
Tires: Bandito short course 2.2 / 3.0
Must have a spur gear cover
VTA
Chassis: any 4wd sedan
Motor: 25.5
ESC Mode: blinky
Battery: 2 cell battery 8.40 max voltage
no HV
any rubber tire
Body: any style body with Race style paint scheme
Weight: 1450 grams
Ride Height: 5mm ride height.
1RC class:
Suspension / Frame
Cars must have 1RC springs in all 4 corners
Exception – using the torsion bar for the EDM, Sprint, Midget
No altering suspension, frame, tires or any other part of the car
Glue is permitted to be used on the right front tire
No balancing tires
No adding or reducing weight on any car / class
Rear steer is allowed in Super classes only
Battery Location
Must remain in the factory supplied battery tray
Battery Spec
2S Lipo batteries
Nano Tech Turnigy
Race City
Speed Factory
300mAH max allowed
35-70C or 45-90C
Battery suppliers to be approved by race director
Body
Bodies can be painted or wrapped
Shoe Goo is allowed to correct tears or reinforcing fender wells
Upgrades
Only 1RC parts are allowed to be used as upgrades
All parts must be used for their intended purpose
No shock limiters
Cars can only used wheels / tires packages, manufactured by 1RC, affiliated with the class they are running
Example: you cannot use late model wheels/tires on the Mod cars
Crate Late Model rules
All rules above apply unless otherwise mentioned below
Medium or soft tires allowed
1RC standard length front and rear springs
1RC black rear end housing permitted
1RC black radius rods permitted
No adjustable tie rods
Stock plastic shock housings must be used
ESC punch / timing must remain stock
1/16 Losi Late Model
Losi mini B or T on HackFab conversion chassis
Stock spur gear - 60T
Pinion - 19T or lower tooth count
Battery - 2s Lipo 7.4v 80C max
BK Bar - mini T or mini B
Mini B rears to be used on front also
All 4 tires to be the same size
Hobby Wing 18A motor and ESC combo only
ESC timing must remain stock out of the box
No turbo or boost allowed
Program card must be available to check ESC settings
Hop up parts are allowed
Including rear adjustable arms
No modifying hop up parts
No homemade parts allowed
McAllister Batesville or Greenville bodies only
Minimum weight: 710 grams
Other classes could be run with adequate turnout.